The Meriam MFT 4010 is a break-through combination
calibrator / HART communicator that truly reduces
the time spent on field calibrations. The Meriam MFT 4010
Series delivers the versatility of a calibrator and
the convenience of HART communications in one
handheld unit.
Users can view up to four measurements
simultaneously on the high resolution LCD or compare
HART PV and AO values to corresponding values
measured by the NIST traceable Meriam MFT. Available
modules include differential, gauge, vacuum and
absolute pressure as well as temperature and
voltage/current. A voltage and current meter is
integral to the base unit. All HART field devices
can be configured, polled and trimmed using HART
communications. Device Specific commands for
supported devices are included with the Meriam MFT.
Meriam
MFT 4010 Advantages
-
All-In-One Tool – takes the place of multiple
handheld instruments, simplifies workload and
improves productivity.
-
Automation for HART field devices –
calibration is automated through auto setup of the
calibrator based on the device settings; digital
trims automate the device adjustment steps.
-
Calibration Types Supported – pressure, t/c,
RTD, I/P, P/I, Switch, Loop and mA/V for
conventional HART transmitter or local indicators.
-
Document As found and As left Calibration
Results – Create calibration procedures on the
handheld or download them from compatible device
management software. Save results to non-volatile
memory.
-
Field Updates – uses Internet downloads to
update and add capability /HART support.
-
Modules – select from a variety of
positive-lock measurement modules for excellent
versatility.
-
Field Recertification – sensor modules and
integral V/I can be recalibrated for zero, span and
linearity via the MFT.
-
User Interface – 2.1” x 2.1” display, four
soft keys (definitions change with mode
requirements) and eight hard keys provide user
interface. Display is configurable for 1 to 4
simultaneous measurements.
-
User Convenience – Auto shut off, Damping,
Min/Max value capture, displayHold, sensor Zero,
direct Contrast adjustment.
-
Security Lockout – Lockout specific
Meriam MFT
settings or all at one time. Diagnostics – Meriam MFT
4010 self-tests upon power up and upon
installation of sensor modules. Advisories are
posted on the display.
-
Dedicated DOF Memory – memory for 500 HART
device drivers. Measurement Units – customary
English and Metric System units are selectable.
